{"product_id":"spicer-10332155-nodular-iron-front-dana-30-differential-cover-primed","title":"Spicer 10332155 Nodular Iron Front Differential Cover (Dana 30 Axles, Gray Primer Finish)","description":"\u003cp data-path-to-node=\"7\"\u003eShield your internal ring and pinion gears from destructive trail impacts, eliminate housing deflection under load, and add a rugged, customizable look to your axle with this genuine \u003cb data-path-to-node=\"7\" data-index-in-node=\"183\"\u003eSpicer Nodular Iron Performance Differential Cover\u003c\/b\u003e. Custom-engineered by Dana, this heavy-duty upgrade (\u003cb data-path-to-node=\"7\" data-index-in-node=\"287\"\u003ePart Number: 10332155\u003c\/b\u003e) is constructed specifically to withstand extreme off-road punishment on vehicles equipped with a standard Dana 30 front axle.\u003c\/p\u003e\n\u003cp data-path-to-node=\"8\"\u003eOn factory 4x4 vehicles, standard differential covers are typically stamped from thin-gauge sheet metal. While perfectly fine for daily highway driving, these factory covers are highly vulnerable to peeling, denting, or puncturing when dragged across jagged rocks, tree stumps, or rugged trail obstacles. A single severe impact can push a stock cover directly inward against the spinning ring gear, causing immediate mechanical failure, or tear the lower sealing flange, causing a rapid loss of high-viscosity gear oil. Swapping out your vulnerable stock unit for this authentic Spicer nodular iron casing provides armor-grade protection that acts as a structural reinforcement bridge for your entire center housing section.\u003c\/p\u003e\n\u003cp data-path-to-node=\"9\"\u003eManufactured from high-tensile nodular iron—a specialized material engineered to deform slightly rather than shatter under high shock loads—this performance cover features heavily reinforced cross-bracing ribs and an extra-thick mounting flange to prevent oil seal separation. It comes pre-treated with a high-durability gray primer finish, giving you a clean canvas to custom-paint or powder-coat the cover to perfectly match your vehicle's color scheme. Additionally, the cover is designed with a raised, threaded fill plug location to ensure you can maintain correct lubricating fluid levels and prevent gear starvation on vehicles running steep aftermarket pinion angles or suspension lifts.\u003c\/p\u003e\n\u003cp data-path-to-node=\"10\"\u003e\u003cb data-path-to-node=\"10\" data-index-in-node=\"0\"\u003eComponent Highlights:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul data-path-to-node=\"11\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,0,0\"\u003e\u003cb data-path-to-node=\"11,0,0\" data-index-in-node=\"0\"\u003eArmor-Grade Nodular Iron Forging:\u003c\/b\u003e Offers drastically higher impact resistance and tensile strength than factory stamped-steel or aluminum covers, effectively safeguarding expensive differential carriers.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,1,0\"\u003e\u003cb data-path-to-node=\"11,1,0\" data-index-in-node=\"0\"\u003eCustom Primed Finish:\u003c\/b\u003e Ships pre-treated with a premium gray primer, ready for direct topcoat painting or custom color matching right out of the box.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,2,0\"\u003e\u003cb data-path-to-node=\"11,2,0\" data-index-in-node=\"0\"\u003eRaised Fill Plug Design:\u003c\/b\u003e Optimized for lifted 4x4 platforms to allow for proper gear oil fill capacities and effortless fluid maintenance checks.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,3,0\"\u003e\u003cb data-path-to-node=\"11,3,0\" data-index-in-node=\"0\"\u003eComplete Installation Pack:\u003c\/b\u003e Includes a fresh set of high-strength mounting bolts and a specialized performance drain plug to make your next differential service clean and straightforward.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-path-to-node=\"12\"\u003e\u003cb data-path-to-node=\"12\" data-index-in-node=\"0\"\u003eAxle \u0026amp; Vehicle Fitment Specifications:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul data-path-to-node=\"13\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"13,0,0\"\u003e\u003cb data-path-to-node=\"13,0,0\" data-index-in-node=\"0\"\u003eAxle Profile Compatibility:\u003c\/b\u003e Fits \u003cb data-path-to-node=\"13,0,0\" data-index-in-node=\"33\"\u003eDana 30 (Standard or Super 30)\u003c\/b\u003e solid front differential assemblies exclusively. \u003ci data-path-to-node=\"13,0,0\" data-index-in-node=\"113\"\u003eDoes not fit Dana 44, Dana 60, or rear axle variants unless specified by custom aftermarket housing setups.\u003c\/i\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"13,1,0\"\u003e\u003cb data-path-to-node=\"13,1,0\" data-index-in-node=\"0\"\u003eJeep Wrangler (JL \/ JLU):\u003c\/b\u003e 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, and 2026 models with front Dana 30 axles.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"13,2,0\"\u003e\u003cb data-path-to-node=\"13,2,0\" data-index-in-node=\"0\"\u003eJeep Wrangler (JK \/ JKU):\u003c\/b\u003e 2007 to 2018 models (Sport, Sahara, and Freedom trims with stock front Dana 30).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"13,3,0\"\u003e\u003cb data-path-to-node=\"13,3,0\" data-index-in-node=\"0\"\u003eJeep Wrangler (TJ \/ LJ):\u003c\/b\u003e 1997 to 2006 models across all standard front axle configurations.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"13,4,0\"\u003e\u003cb data-path-to-node=\"13,4,0\" data-index-in-node=\"0\"\u003eJeep Cherokee (XJ):\u003c\/b\u003e 1984 to 2001 models (High-pinion and low-pinion Dana 30 front ends).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"13,5,0\"\u003e\u003cb data-path-to-node=\"13,5,0\" data-index-in-node=\"0\"\u003ePosition:\u003c\/b\u003e Front Axle Center Section ONLY. \u003ci data-path-to-node=\"13,5,0\" data-index-in-node=\"42\"\u003e(Note: Includes cover, fill plug, and matching flange bolts).\u003c\/i\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Spicer","offers":[{"title":"Default Title","offer_id":43562008903754,"sku":"PLAT-SPICER-10332155","price":148.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/5560\/6858\/files\/12_ffe8853b-691f-4c89-bb1f-98e35b3b1218.png?v=1777681817","url":"https:\/\/platinumperformanceparts.com\/products\/spicer-10332155-nodular-iron-front-dana-30-differential-cover-primed","provider":"Platinum Performance Parts","version":"1.0","type":"link"}