{"product_id":"plat-spicer-kit1022","title":"Spicer S44\/3R Rear Carrier \u0026 U-Joint Kit - 2005 GMC Sierra 1500 2WD - Extended Cab, Manual, 143.5-in WB, Quadrasteer, 2-pc rear shaft","description":"\u003cp\u003eFor the rear driveshaft on 2005 GMC Sierra 1500 2WD.\u003cbr\u003eThis is a limited listed-parts bundle. Match the complete vehicle and shaft conditions below before ordering.\u003cbr\u003eRequired configuration (2005):\u003cbr\u003eBody\/cab: Extended Cab Pickup; Drive: RWD; Transmission: Manual; Wheelbase (in): 143.5; Wheelbase (cm): 364.5.\u003cbr\u003e- Center support bearing: 1 x Spicer 212028-1X - Replaces OE Part Number(s) 88934865.\u003cbr\u003e- Rear Driveshaft at Rear Axle: 1 x Spicer 5-3147X - Greaseable; Inside Snap Ring Dimension of 2.556in; 1.125in Bearing Cap Diameter; with 2 Piece Rear Driveshaft; with Quadrasteer.\u003cbr\u003e- Rear Driveshaft at Support Bearing: 1 x Spicer 5-3147X - Greaseable; Inside Snap Ring Dimension of 2.556in; 1.125in Bearing Cap Diameter; with 2 Piece Rear Driveshaft; with Quadrasteer.\u003cbr\u003e- Rear Driveshaft at Transmission: 1 x Spicer 5-3147X - Greaseable; Inside Snap Ring Dimension of 2.556in; 1.125in Bearing Cap Diameter; with 2 Piece Rear Driveshaft; with Quadrasteer.\u003c\/p\u003e\u003cp\u003eIncludes: 1 x Spicer 212028-1X, 3 x Spicer 5-3147X.\u003c\/p\u003e\u003cp\u003eMeasure before ordering:\u003cbr\u003e212028-1X: 1.574-inch bearing bore\/inside diameter. Mounting centers 6.620 inches; bracket width (front-to-back) 1.500 inches; bearing centerline to mounting surface 2.250 inches. M10 × 1.5 mounting studs, shown in official Style 17 diagram. Current page lists 0.394-inch bolt-hole field and M10 × 1.5 stud thread.\u003cbr\u003e5-3147X: 1.125-inch (28.575 mm) bearing caps on both axes; 2.556-inch (64.922 mm) inside snap-ring span (NOT overall width) on both axes. Inside snap rings (ISR). Greaseable.\u003cbr\u003eUse a caliper to measure every cap and BOTH joint axes. Measure the inside snap-ring span, not the overall cap-to-cap width.\u003cbr\u003eFor the bearing, check the shaft bearing seat\/bore and the actual mounting arrangement. Mounting centers are not overall bracket length; center height is measured to the mounting surface. Older catalogs show 1.520-inch bracket width; current Dana specification is 1.500 inches. Check clearance where critical.\u003c\/p\u003e\u003cp\u003eOnly the listed parts are included. This is not a complete driveshaft or CV rebuild kit; unlisted centering parts, yokes and separate installation hardware are not included. Verify modified shafts individually.\u003c\/p\u003e","brand":"Spicer","offers":[{"title":"Default Title","offer_id":67771909734474,"sku":"PLAT-SPICER-KIT1022","price":139.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/5560\/6858\/files\/spicer_bom__212028-1xx1__5-3147xx3.png?v=1792597007","url":"https:\/\/platinumperformanceparts.com\/products\/plat-spicer-kit1022","provider":"Platinum Performance Parts","version":"1.0","type":"link"}