{"product_id":"jeep-xj-yj-dana-30-disconnect-front-axle-inner-tube-seal-kit","title":"Spicer Front Inner Axle Shaft Oil Seal Kit for Jeep Wrangler YJ \u0026 Cherokee XJ (Dana 30 with Central Axle Disconnect)","description":"\u003cp data-path-to-node=\"7\"\u003eStop front axle fluid leaks, protect your internal engagement mechanism, and maintain critical gear lubrication with this genuine \u003cb data-path-to-node=\"7\" data-index-in-node=\"130\"\u003eSpicer Front Inner Axle Shaft Oil Seal Kit\u003c\/b\u003e. Specifically bundled to service \u003cb data-path-to-node=\"7\" data-index-in-node=\"206\"\u003eDana 30 front solid axles equipped with a Central Axle Disconnect (CAD) system\u003c\/b\u003e, this package completely refreshes the primary oil barriers on your vacuum-disconnect Jeep.\u003c\/p\u003e\n\u003cp data-path-to-node=\"8\"\u003eOn vacuum-disconnect front axle configurations, the sealing layout is unique compared to non-disconnect models. The driver-side seal is pressed deep inside the center section pumpkin next to the differential carrier, while the passenger-side oil seal is located directly to the outboard side of the shift-fork disconnect housing. Over decades of trail use, continuous engagement cycling, or rough axle shaft installations during a U-joint replacement, the delicate rubber sealing lips can slice, tear, or harden. A failing seal will typically announce itself when gear oil begins weeping or dripping out from the center-right disconnect shift-motor housing or the ends of the front axle tubes.\u003c\/p\u003e\n\u003cp data-path-to-node=\"9\"\u003eThis original equipment manufacturer (OEM) replacement bundle includes both premium rubber-encased oil seals to properly overhaul the vacuum-disconnect housing configuration. Sourcing a genuine Spicer component guarantees exact factory dimensional tolerances, matching steel support casings, and the correct rubber durometer required to maintain a persistent, leak-free seal against the spinning two-piece passenger axle shaft journals.\u003c\/p\u003e\n\u003cp data-path-to-node=\"10\"\u003e\u003cb data-path-to-node=\"10\" data-index-in-node=\"0\"\u003eKit Contents:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul data-path-to-node=\"11\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,0,0\"\u003e(1) Premium Driver-Side Inner Axle Shaft Oil Seal (Located at Carrier)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,1,0\"\u003e(1) Premium Passenger-Side Inner Axle Shaft Oil Seal (Located at Disconnect Housing)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-path-to-node=\"12\"\u003e\u003cb data-path-to-node=\"12\" data-index-in-node=\"0\"\u003eKit Highlights:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul data-path-to-node=\"13\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"13,0,0\"\u003e\u003cb data-path-to-node=\"13,0,0\" data-index-in-node=\"0\"\u003eDisconnect Specific Solution:\u003c\/b\u003e Purpose-built exclusively for two-piece passenger side axle designs utilizing a vacuum-operated central axle disconnect system.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"13,1,0\"\u003e\u003cb data-path-to-node=\"13,1,0\" data-index-in-node=\"0\"\u003eGenuine Spicer OEM Quality:\u003c\/b\u003e Engineered by the original equipment axle supplier to guarantee perfect structural compliance and factory-spec rubber flexibility.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"13,2,0\"\u003e\u003cb data-path-to-node=\"13,2,0\" data-index-in-node=\"0\"\u003ePrevents Drivetrain Fluid Loss:\u003c\/b\u003e Traps your gear oil inside the vital internal reservoirs where it can continuously protect your moving shift collar, splines, and differential bearings.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"13,3,0\"\u003e\u003cb data-path-to-node=\"13,3,0\" data-index-in-node=\"0\"\u003eRestores System Integrity:\u003c\/b\u003e Ensures that gear oil does not migrate down the passenger tube, keeping the vacuum-actuated shift area operating as intended by the factory.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-path-to-node=\"14\"\u003e\u003cb data-path-to-node=\"14\" data-index-in-node=\"0\"\u003eVehicle \u0026amp; Axle Fitment:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul data-path-to-node=\"15\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"15,0,0\"\u003e\u003cb data-path-to-node=\"15,0,0\" data-index-in-node=\"0\"\u003eAxle Profile:\u003c\/b\u003e Solid Monobeam Front \u003cb data-path-to-node=\"15,0,0\" data-index-in-node=\"35\"\u003eDana 30 (Central Axle Disconnect \/ CAD Models Only)\u003c\/b\u003e.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"15,1,0\"\u003e\u003cb data-path-to-node=\"15,1,0\" data-index-in-node=\"0\"\u003eJeep Wrangler:\u003c\/b\u003e 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, and 1995 Wrangler YJ models with factory vacuum-disconnect front axles.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"15,2,0\"\u003e\u003cb data-path-to-node=\"15,2,0\" data-index-in-node=\"0\"\u003eJeep Cherokee:\u003c\/b\u003e 1984–1991 Cherokee XJ models equipped with the vacuum shift indicator\/disconnect front axle casting.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"15,3,0\"\u003e\u003cb data-path-to-node=\"15,3,0\" data-index-in-node=\"0\"\u003eJeep Comanche:\u003c\/b\u003e 1986–1991 MJ pickup trucks running the factory vacuum-disconnect front end configuration.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"15,4,0\"\u003e\u003ci data-path-to-node=\"15,4,0\" data-index-in-node=\"0\"\u003ePlease Note: This kit will not fit standard one-piece non-disconnect front axles (such as 1997-2006 TJ models or later XJ models) unless they still retain the factory CAD housing.\u003c\/i\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Spicer","offers":[{"title":"Default Title","offer_id":43562450780234,"sku":"PLAT-SPICER-KIT201","price":28.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/5560\/6858\/files\/12_5d27c02d-2ddd-4701-966a-b5f2a6635380.png?v=1777723170","url":"https:\/\/platinumperformanceparts.com\/products\/jeep-xj-yj-dana-30-disconnect-front-axle-inner-tube-seal-kit","provider":"Platinum Performance Parts","version":"1.0","type":"link"}