{"product_id":"dana-50-60-thrust-washer-snap-ring-kit-ford-f250-f350-super-duty-1998-2004","title":"Spicer Front Outer Axle Stub Shaft Thrust Washer \u0026 Snap Ring Hardware Overhaul Kit for 1998-2004 Ford Super Duty (Dana 50 \/ 60, Both Sides)","description":"\u003cp data-path-to-node=\"7\"\u003eEliminate excessive outer stub shaft end-play, prevent premature wear on your front vacuum seals, and fully restore your 4x4 hub locking assemblies with this genuine \u003cb data-path-to-node=\"7\" data-index-in-node=\"166\"\u003eSpicer Outer Axle Shaft Thrust Washer \u0026amp; Snap Ring Overhaul Kit\u003c\/b\u003e. Specifically packaged as a complete, dual-side hardware solution for \u003cb data-path-to-node=\"7\" data-index-in-node=\"299\"\u003e1998–2004 Ford F-250 and F-350 Super Duty\u003c\/b\u003e trucks and \u003cb data-path-to-node=\"7\" data-index-in-node=\"352\"\u003e2000–2005 Ford Excursion\u003c\/b\u003e models, this premium kit includes all the mandatory wheel-end hardware required to service both front steering knuckles at the same time.\u003c\/p\u003e\n\u003cp data-path-to-node=\"8\"\u003eOn solid-axle Ford platforms, each outer axle stub shaft passes through the steering knuckle and wheel hub unit bearing assembly, locked tightly in place by a heavy-duty snap ring. Positioned immediately behind these snap rings is a critical 3-piece thrust washer configuration consisting of one grooved plastic\/nylon spacer flanked by two steel shims. Together, these components lock the axle shaft's outward lateral movement. Over high mileage, heavy towing, or routine front-end maintenance, the plastic thrust washers naturally score, flatten, or break, while the steel snap rings can distort or lose their tension during removal. Failing to replace worn or missing thrust washers introduces excessive shaft \"in-and-out\" play, which rapidly destroys your expensive inner spindle needle bearings and tears the large rubber vacuum knuckle seals—instantly disabling your dashboard-controlled automatic 4WD engagement system.\u003c\/p\u003e\n\u003cp data-path-to-node=\"9\"\u003eThis original equipment manufacturer (OEM) small parts master package supplies a factory-correct hardware setup to completely overhaul \u003cb data-path-to-node=\"9\" data-index-in-node=\"135\"\u003eboth the driver and passenger side wheel stations\u003c\/b\u003e. Sourcing genuine Spicer hardware ensures exact original equipment washer thicknesses, precise outer snap ring dimensions, and specialized materials engineered to withstand the continuous rotational friction of your front axle assemblies.\u003c\/p\u003e\n\u003cp data-path-to-node=\"10\"\u003e\u003cb data-path-to-node=\"10\" data-index-in-node=\"0\"\u003eKit Contents (Services Both Left \u0026amp; Right Front Steering Knuckle Hub Assemblies):\u003c\/b\u003e\u003c\/p\u003e\n\u003cul data-path-to-node=\"11\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,0,0\"\u003e(2) Heavy-Duty Outer Axle Shaft Retaining Snap Rings (Part # 620180)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,1,0\"\u003e(2) Specialized Grooved Plastic\/Nylon Thrust Washers (Part # 47766)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,2,0\"\u003e(4) Precision-Stamped Inner Steel Thrust Washer Shims (Part # 701119 \/ 47714)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-path-to-node=\"12\"\u003e\u003cb data-path-to-node=\"12\" data-index-in-node=\"0\"\u003eKit Highlights:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul data-path-to-node=\"13\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"13,0,0\"\u003e\u003cb data-path-to-node=\"13,0,0\" data-index-in-node=\"0\"\u003eComplete Dual-Side Master Set:\u003c\/b\u003e Supplies exactly enough factory-correct thrust washers, shims, and snap rings to fully overhaul both the left and right front outer stub shafts simultaneously.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"13,1,0\"\u003e\u003cb data-path-to-node=\"13,1,0\" data-index-in-node=\"0\"\u003eCorrects Axle Shaft End-Play:\u003c\/b\u003e Restores factory-spec lateral depth alignment for your outer stub shafts, preventing inward and outward movement that can damage internal hub components.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"13,2,0\"\u003e\u003cb data-path-to-node=\"13,2,0\" data-index-in-node=\"0\"\u003eGenuine Spicer OEM Quality:\u003c\/b\u003e Sourced straight from the vehicle's original axle supplier to guarantee matching factory blueprints, precise washer stack heights, and uncompromised spring-steel tension.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"13,3,0\"\u003e\u003cb data-path-to-node=\"13,3,0\" data-index-in-node=\"0\"\u003eProtects Hub Vacuum Seals:\u003c\/b\u003e Eliminates excessive shaft slop that rubs against and tears your primary knuckle vacuum seals, helping maintain an airtight environment for your Electronic Shift-on-the-Fly (ESOF) system.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"13,4,0\"\u003e\u003cb data-path-to-node=\"13,4,0\" data-index-in-node=\"0\"\u003eMandatory Service Hardware:\u003c\/b\u003e A highly recommended replacement pack whenever pulling the front axle shafts for a U-joint, unit bearing, or knuckle seal rebuild.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-path-to-node=\"14\"\u003e\u003cb data-path-to-node=\"14\" data-index-in-node=\"0\"\u003eVehicle \u0026amp; Axle Fitment:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul data-path-to-node=\"15\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"15,0,0\"\u003e\u003cb data-path-to-node=\"15,0,0\" data-index-in-node=\"0\"\u003eAxle Profiles:\u003c\/b\u003e Open-Knuckle Solid\/Monobeam Front Axles: \u003cb data-path-to-node=\"15,0,0\" data-index-in-node=\"56\"\u003eDana 50 and Dana 60\u003c\/b\u003e configurations with vacuum-operated or manual locking hubs.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"15,1,0\"\u003e\u003cb data-path-to-node=\"15,1,0\" data-index-in-node=\"0\"\u003eFord Trucks:\u003c\/b\u003e 1998, 1999, 2000, 2001, 2002, 2003, and 2004 Ford F-250 Super Duty and F-350 Super Duty 4x4 models (Fits both leaf spring front suspension setups).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"15,2,0\"\u003e\u003cb data-path-to-node=\"15,2,0\" data-index-in-node=\"0\"\u003eFord Excursion:\u003c\/b\u003e 2000, 2001, 2002, 2003, 2004, and 2005 4x4 vehicles.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"15,3,0\"\u003e\u003cb data-path-to-node=\"15,3,0\" data-index-in-node=\"0\"\u003ePosition:\u003c\/b\u003e Front Outer Axle Stub Shaft Tips — Left (Driver) and Right (Passenger) Side Wheel Hub Interfaces (1 Kit Overhauls Entire Front Axle)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Spicer","offers":[{"title":"Default Title","offer_id":43562423779402,"sku":"PLAT-SPICER-KIT169","price":43.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0706\/5560\/6858\/files\/12_1c0fd942-6bb9-4985-babb-be67e9e9e241.jpg?v=1777722623","url":"https:\/\/platinumperformanceparts.com\/products\/dana-50-60-thrust-washer-snap-ring-kit-ford-f250-f350-super-duty-1998-2004","provider":"Platinum Performance Parts","version":"1.0","type":"link"}